Dynapac 10000333x0A000001, Instruction Manual

Page: 69 / 105

Maintenance - Lubricants and symbols
ICC1200C-1EN3.pdf 2012-05-16
Maintenance - Lubricants and symbols
Fluid volumes Fluid volumes
Hydraulic tank 45 liters 47.5 qts Hydraulic tank 45 liters 47.5 qts
Diesel engine 7 liters 7.4 qts Diesel engine 7 liters 7.4 qts
Drum 4 liters 4.2 qts Drum 4 liters 4.2 qts
Coolant 5,5 liters 5.8 qts Coolant 5,5 liters 5.8 qts
Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating, resulting in rapid
wear. Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating, resulting in rapid
wear.
DYNAPAC DYNAPAC
ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F) Shell Rimula R4 L
15W-40, API CH-4 or
equivalent. ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F) Shell Rimula R4 L
15W-40, API CH-4 or
equivalent.
HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-104°F) Shell Tellus S2 V68 or
equivalent. HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-104°F) Shell Tellus S2 V68 or
equivalent.
Air temperature over +50°C
(104°F) Shell Tellus S2 V100 or
equivalent. Air temperature over +50°C
(104°F) Shell Tellus S2 V100 or
equivalent.
BIOLOGICAL
HYDRAULIC FLUID,
PANOLIN When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up. PANOLIN HLP Synth 46
(www.panolin.com) BIOLOGICAL
HYDRAULIC FLUID,
PANOLIN When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up. PANOLIN HLP Synth 46
(www.panolin.com)
DRUM OIL Air temp. -15°C - +40°C
(5°F-104°F) Shell Spirax S3 AX
80W/90, API GL-5 Dynapac Gear Oil 300 ,
P/N 4812030756 (5 liter)
DRUM OIL Air temp. -15°C - +40°C
(5°F-104°F) Shell Spirax S3 AX
80W/90, API GL-5 Dynapac Gear Oil 300 ,
P/N 4812030756 (5 liter)
Air temperature 0°C - over
+40°C (32°F- over 104°F) Shell Spirax AX
85W/140, API GL-5 Air temperature 0°C - over
+40°C (32°F- over 104°F) Shell Spirax AX
85W/140, API GL-5
GREASE Shell Retinax LX2 or
equivalent. Dynapac Roller Grease
(0.4kg),
P/N 4812030096
GREASE Shell Retinax LX2 or
equivalent. Dynapac Roller Grease
(0.4kg),
P/N 4812030096
FUEL See engine manual. - - FUEL See engine manual. - -
COOLANT Anti-freeze protection down to
about -37°C (-34.6°F) GlycoShell/Carcoolant
774C or equivalent,
(mixed 50/50 with water) COOLANT Anti-freeze protection down to
about -37°C (-34.6°F) GlycoShell/Carcoolant
774C or equivalent,
(mixed 50/50 with water)
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac. Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac.
61