Dynapac 10000333x0A000001, Instruction Manual

Page: 45 / 105

Operation
ICC1200C-1EN3.pdf 2012-05-16
Interlock
The roller is equipped with Interlock.
The diesel engine with switch off after 4 seconds if the
operator gets off the seat when going
forwards/backwards.
If the control is in neutral when the operator stands up
a buzzer will go on until the parking brake button is
activated.
The engine does not stop if the parking brake is
activated.
The diesel engine will switch off immediately if for any
reason the forward/reverse lever is moved out of
neutral when the operator is not sitting down and the
parking brake button has not been activated.
Sit down for all operations! Sit down for all operations!
Operator position
1
2
3
4
Fig. Driver seat
1. Seat belt
2. Safety rails
3. Rubber element
4. Anti-slip
If an ROPS (Roll Over Protective Structure) is fitted to
the roller, always wear the seat belt (1) and wear a
protective helmet.
Always replace the seat belt (1) if it shows signs of
wear or has been subjected to excessive strain. Always replace the seat belt (1) if it shows signs of
wear or has been subjected to excessive strain.
Check that the platform's rubber elements (3) are
in good condition. If the elements are worn this
will have a negative effect on comfort. Check that the platform's rubber elements (3) are
in good condition. If the elements are worn this
will have a negative effect on comfort.
Ensure that the anti-slip (4) on the platform is in
good condition. Replace where anti-slip friction is
poor. Ensure that the anti-slip (4) on the platform is in
good condition. Replace where anti-slip friction is
poor.
37