10
Installation
cradle for iPod touch
To change the cradle:
To increase or decrease the force required to tilt/rotate the cradle, tighten or loosen the nut.
If the nut becomes loose over time and the cradle starts moving about too easily, tighten the
nut until the force required to adjust the cradle position is as desired.
CAUTION
Use only the charging cable supplied by D
YNAMIC
C
ONTROLS
. Do not
substitute this cable with one that looks similar. The characteristics of
the supplied cable are essential to the correct operation of the iPortal.
The charging cable is available in only one length: 950 mm / 37.4 inches.
Remove the cradle from the
mounting arm.
o
Loosen and release the nut from
the cradle.
o
Pull hard to release the cradle
from the mounting arm.
Replace the cradle on the
mounting arm.
o
Push the cradle firmly into
position.
o
Turn the nut until it is tight.
1
2
1
2
