19
Installation
NOTE
Allow between 30 and 60 seconds for the
Enter PIN
screen to be
displayed.
NOTE
When you see an instruction to “cycle the power” on the iDevice,
turn the power off at the Joystick, and then turn it on again.
3.1.4.3
Pairing a different iDevice with the iPortal
To pair a different iDevice with the iPortal, it may be necessary first to un-pair the previous
device.
To un-pair a device previously paired with the iPortal:
Step 1:
on the device to be un-paired, set
Airplane Mode
to
ON
Step 2:
on the device to be paired, follow the procedure
“
Pairing the iDevice with the iPortal
”
in the section above
NOTE
Allow approximately 60 seconds for the iPortal to find the new
device.
Step 3:
On the un-paired device, reset
Airplane
mode to
OFF
REFERENCE
For more details of how to manage Bluetooth
®
on an iDevice refer
to the online help available at www.apple.com/support
After the iDevice and the iPortal have successfully paired,
the connection is listed on the Bluetooth® menu [7].
Note that sometimes when attempting to pair the iDevice
with the iPortal, one or the other may time out waiting for
input from you. If the procedure does not work the first time,
repeat the steps above.
If the chair is programmed to go into sleep mode after only
one minute of inactivity, the chair may enter this mode
during pairing, causing pairing to fail. If this is the case,
increase the sleep timeout value.