background image

 

26 

 

Appendices 

6.7

 

Environmental statement 

 

 
This product has been supplied from an environmentally aware 
manufacturer. 

Please be environmentally responsible and recycle this product at the end 
of its life through your local recycling facility. 

This product may contain substances that could be harmful to the 
environment if disposed of into a landfill. 

Do not dispose of this product in fire. 

 

 

6.8

 

Apple disclaimer 

You agree that the use of this software together with an iPod, iPhone or iPad ("Apple 
Product") shall only be as a personal organization or supplemental data display tool and not 
as a source of medical advice. You agree that this software will never be used to replace the 
advice of a doctor, or your own common sense and independent judgment, and that you 
will not at any time rely on any information presented on your Apple Product as the basis for 
health care, medical or other decisions that may result in injury or other ill effects. You agree 
to take sole responsibility for your health care decisions, including contacting a physician or 
other health care professional regarding all medical conditions, tests, diagnoses and 
treatment options and agree that Apple shall have no liability for any action You or anyone 
using the software may take, regardless of the information received, displayed, calculated or 
transmitted by your Apple Product.  Apple assumes no risk for your use of the software and 
makes no warranties whatsoever, express or implied, regarding the accuracy, completeness 
or usefulness of any information presented on your Apple Product as a result of using the 
software. 

6.9

 

EU Authorised Representative 

Dynamic Europe Ltd. 
Finepoint Way 
Kidderminster, Worcestershire 
DY11 7FB, United Kingdom 
Tel: +44 1562 826600 

 

 

Summary of Contents for iPortal




























Reviews: