16
Installation
3.1.3.4
Connecting the module into a DX or DX2 system
Note that the iPortal module has only one DX BUS socket.
Connecting with the DX system using any available DX BUS connector
Use an available connector on any DX module and a short DX cable such as the GSM63005.
Alternatively, use an available connector on a DX splitter box (DX-SKT-X4) and a short DX
cable such as the GSM63005.
Some DX-compatible modules have only one DX BUS socket, for example the
DX2-REM42x Remote. If this is the case, use a Y cable (GCB65231) to connect to the iPortal.
NOTE
DX BUS extensions and cables are available in a range of lengths. See
the D
YNAMIC
C
ONTROLS
’ product catalogue for more information.
Always use the shortest cable that can be routed without it being
stretched or pinched.
Y Cable