24
Appendices
6.3
Maintenance
The following instructions must be passed on to the operator before use of the product.
Keep all D
YNAMIC
C
ONTROLS
products free of dust, dirt and liquids. To clean the product,
use a cloth dampened with warm soapy water. Do not use chemicals, solvents or
abrasive cleaners, as this may damage the product.
Every month, check all vehicle components for loose, damaged or corroded
components, such as connectors, terminals, or cables. Restrain all cables to protect them
from damage. Replace damaged components.
Once every 6 months, test all switchable functions on the D
YNAMIC
C
ONTROLS
electronics
system to ensure they function correctly.
There are no user-serviceable parts in any D
YNAMIC
C
ONTROLS
electronic product. Do not
attempt to open any case or undertake any repairs, else the warranty will be void and
the safety of the system may be compromised.
If any doubt exists with any of the above, consult your nearest service centre or agent.
WARNING
It is the responsibility of the end user to maintain the product in a state
of good repair at all times. If any component is damaged in any way,
or if internal damage may have occurred (for example by being
dropped), have it checked by qualified personnel before operating.
6.4
Warranty
All equipment supplied by Dynamic Controls is warranted by the company to be free from
faulty workmanship or materials. If any defect is found within the warranty period, the
company will at its sole discretion refund, replace or repair the equipment without charge for
materials or labour.
This warranty is subject to the provisions that the equipment:
has been correctly installed
has been thoroughly checked upon completion of installation, and all programmable
options (if any) have been correctly adjusted for safe operation prior to use
has been used solely in accordance with this manual and all other manuals of the
Dynamic Controls products that are used on the mobility vehicle
has not been subjected to misuse or accident, or been modified or repaired by any
unauthorised personnel
has not been connected to non-specified third party devices without the specific
approval of Dynamic Controls
has been used solely in combination with electrically powered mobility vehicles in
accordance with the intended use and the recommendations of the vehicle
manufacturer
