14
Installation
3.1.3.3
Connecting the module into a Shark system
Note that the iPortal module has only one DK BUS socket.
Connecting with the Shark system
Use one Y cable(GSM80951) as shown in the diagram below.
Connecting with the Shark system when there is an Attendant Control Unit (ACU)
If an Attendant Control Unit (ACU) is in the system, use two Y cables (GSM80951) as shown in
the diagram below.
Connecting with the Shark system using a Y cable at the remote
If there is no ACU, and if it is more convenient for cable routing, a Y cable (GSM80951) may
be used from the Shark remote, as shown in the diagram below.
Y Cables
GSM80951
