8
Installation
3
Installation
The installation instructions for the iPortal module should be read and understood in
conjunction with the installation manual for the Shark, DX or DX2 host system.
CAUTION
Chemical cleaning agents may cause damage to the iPortal module,
mounting arm and cradle. To clean the iPortal system, wipe with a
damp cloth, using only warm soapy water. For cleaning instructions for
the iDevice refer to the iPhone, or iPod touch User Guide.
3.1
Mounting and connecting
The iPortal system includes a mounting arm, a cradle, a connection module and a USB
cover. In addition, a DX BUS cable (for DX and DX2) or a DK BUS cable and Y-cable (for
Shark) is needed. These must be ordered separately.
3.1.1
Mounting the arm and cradle
The iPortal mounting arm and cradle can be mounted anywhere on the wheelchair.
However, when choosing the location of the mounting arm and cradle, the following should
be taken into consideration:
ease of access by the wheelchair user
the length of the charging cable
mechanical interference with other equipment
protrusion beyond the frame of the wheelchair
crushing by the moving parts of the wheelchair
WARNING
Route the cables and fasten all D
YNAMIC
C
ONTROLS
’ components in a
position so that the cables, the connectors and the connector sockets
do not allow water entry or are subjected to physical strain, abuse or
damage, such as cutting or crushing. Take particular care on vehicles
with movable structures such as seat raise/tilt or swing-away arms.
Make sure that the cables do not extend from the wheelchair to
prevent them getting caught or damaged by external objects.
