No. 60025, Issue 5. January 1999
8 Programming
41
3.
The display reads:
JOYSTICK CALIBRATION
EXIT
NEXT
BEGIN
Pressing EXIT at any point during the calibration procedure will return
you to screen
.
ì
6.
Press BEGIN.
JOYSTICK CALIBRATION
Rotate J/S
-> Neutral -> END
EXIT
END
7.
Move the joystick around the outer physical extremities of the restrictor
plate. Ensure that all corners are pressed into.
Return the joystick to neutral.
8.
Press END to end the sequence and return to the main menu.
The calibration is saved.
Combined Lighting Actuator Module (CLAM) Enable
1.
Enable the Technician Mode
2.
Press NEXT in the main menu until the screen reads :
* * MAIN MENU * *
View or edit Remote
Module ? (Tech Only)
NEXT
YES
Press YES.
3.
The display reads:
CLAM
disabled. Enable ?
EXIT
NEXT
YES