No. 60025, Issue 5. January 1999
Programming 8
38
Test Driving and Saving Changes
Changes can be test driven before being permanently saved as the DX System
can be driven with the HHP plugged in. Even if the HHP is disconnected, the
changes will remain current until the DX Remote is turned off. Once turned
off, the settings will return to their original values.
Changes are saved when the NEXT button on the HHP is pressed. If the DX
Remote is turned off before the HHP is returned to the main menu, all changes
to the current parameter are lost.
To View / Adjust Drive Programs
Pressing EXIT at any point during the procedure will return you to the main
menu.
1. Press NEXT in the main menu until the appropriate Drive Program is
shown.
* * MAIN MENU * *
View or edit
Program : 1 ?
NEXT
YES
2. Press YES to edit Drive Program.
3. The screen now reads :
TUNE PROG 1 RESPONSE
Max forward speed
25%
EXIT
NEXT UP DOWN
Press NEXT to step through the adjustable parameters.
These are :
Max. Forward Speed
Forward Acceleration
Forward Deceleration
Max. Reverse Speed
Reverse Acceleration
Reverse Deceleration
Max. Turning Speed
Turning Acceleration
Turning Deceleration