FLIGHT MANUAL
DYNALI HELICOPTER COMPANY
Edition N°3
DYNALI H2S January 2012
__________________________________________________________________________________
41
4.9.
ENGINE SHUT DOWN PROCEDURE
After touchdown
Decrease collective
Collective
Full idls
Cyclic
Neutral
Rudder pedals
Neutral
RPM
Idle for 3 minutes
T°
Wait for decrease
Instruments
OFF
Ignition
OFF
Do not leave the seat while the rotor is turning.
When at a standstill, do not brake the rotor by raising the collective.
At low revs, the wind can cause the rotor blades to swing down to head height. All
movement of personnel under the rotor circumference at standstill is extremely dangerous. It
must be prohibited.
(in the case where boarding or disembarking of a passenger is
necessary while the rotor is turning instruct your passengers to move away to the front of the
helicopter and keep very low)
e.g. : landing on a mountain or on unstable terrain which makes it impossible to stop the
engine.
4.10.
CHECKLIST (following flight)
After cutting the engine :
Monitor the stopping time of the rotor.
Get into the habit of placing one
ʼ
s hand on the RTG and to control the thermal stamp.