background image

UNPACKING & WARRANTY

Carefully open the packaging and take out the power amplifier. Next to the power amplifier itself, the 

package also includes this owner’s manual, a mains cord and the warranty certificate. Keep the original 

invoice, which states the purchase/delivery date together with the warranty certificate at a safe place.

INSTALLATION NOTES

Generally,  installing  or  mounting  LX  power  amps  should  be  carried  out  in  a  way  that  guarantees 

continuously unopposed front-to-rear air circulation. Installation of appliances with opposite air circulation 

within one cabinet or closed rack shelf system is not recommendable. When including appliances in a 

closed cabinet or rack shelf system make sure to provide sufficient ventilation. Leave a gap of at least 

60mm x 330mm

 (up to the cabinet’s top ventilation louvers) for air circulation between the rear of the 

power amplifier and the cabinet’s/rack’s rear inner wall. Make sure to leave at least 100mm of space 

above the cabinet or rack shelf system. Since temperatures inside of the cabinet or rack shelf system 

can easily rise up to 40°C during operation, bearing in mind the maximally allowable environmental 

temperatures for all other appliances installed in the same rack shelf system is mandatory (also refer to 

“MAINS OPERATION AND RESULTING TEMPERATURE”).

Caution:  For trouble-free operation exceeding the maximally allowable environmental 

 

temperature of +40°C is not permissible.

To prevent the front panel from bending, the use of installation rails or optionally available “rear-rack-

mount” rails is obligatory when installing the appliance in a rack shelf system or cabinet.

The  power  amplifier  has  to  be  protected  against:  dripping  or  splashing  water,  direct  sunlight,  high 

temperatures or direct influence of heat sources, high humidity, extensive dust and vibrations. 

If  guaranteeing  the  listed  requirements  is  not  possible  on  a  long-term  basis,  regular  servicing  is 

absolutely  mandatory  to  prevent  the  power  amplifier  from  possible  failure,  mainly  being  caused  by 

negative environmental effects.

Condensation on internal parts may occur when transporting the power amplifier from a cold into a 

warmer environment. In that case operation is only permissible after the appliance has gained the new 

temperature (after approximately one hour). If foreign objects or liquids have entered the power amp’s 

enclosure,  make  sure  to  immediately  separate  the  appliance  from  the  mains  power  and  contact  an 

authorized service center for inspection before continuing operation.

DESCRIPTION

FCC INFORMATION (U.S.A)

1.  IMPORTANT: Do not modify this unit! Changes or modifications not expressly approved 

by the manufacturer could void the user`s authority, granted by the FCC, to operate the 

equipment.

2.  NOTE : This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause harmful interference to radio 

or television reception , which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

 

5

Summary of Contents for LX 1600





































Reviews: