CN9800
CN9510
FPC (FMR3YC*)
S2x3CT
Figure 4-23 Removing the USB board (1)
5. Remove the following screws and the USB board from the Cover
Assembly.
Figure 4-24 Removing the USB board (2)
4.18.2 Installing the 3G module/USB board
To install the 3G module/USB board (FUR3CN*), follow the steps below
and refer to
Figure 4-21
to
Figure 4-24
.
1. Set the
USB board (FUR3CN*)
to the Cover Assembly and secure it
with the screws.
2. Connect the
FPC (FMR3YC*)
to the connector
CN9510
on the
SYSTEM board and
CN9800
on the USB board.
3. Insert the
3G MODULE
to the connector
CN2610
on the USB board.
Secure the 3G MODULE with the screw.
4. Connect the
3G ANTENNA cables
to the connectors on the 3G
MODULE. (red tube to
“MAIN”)
5. Stick a new
INSU SQUARE
in place.
Summary of Contents for PORTEGE X40-G
Page 7: ......
