Figure 4-5 Removing the Base Assembly (2)
4.12 Battery pack
4.12.1 Removing the Battery pack
To remove the battery pack, follow the steps below and refer to
Figure 4-6
.
1. Disconnect the
BATTERY HARNESS
from the connector
CN8021
on the SYSTEM board.
2. Remove the following screws and the battery pack.
Base assembly
Cover Assembly
Latch
Take care not to short circuit the terminals when removing
the battery pack. Similarly, do not drop, knock, scratch,
disassemble, twist, or bend the battery pack.
Summary of Contents for PORTEGE X40-G
Page 7: ......
