SH2x2.5CT
Speaker
Speaker
CN6000
Speaker harness
Figure 4-16 Removing the Speaker (5)
4.16.2 Installing the Speaker
To install the Speaker, follow the steps below.
1. Set the speakers to the slots of the Cover Assembly and secure it with
the screws.
2. Arrange the
Speaker harness
under the guides as shown below, and
fix it with the new INSU.
3. Connect the
Speaker harness
to the connector
CN6000
on the system
board.
4. Arrange the rest of
Speaker harness
as shown below, and fix it with
new stick stapes.
Figure 4-17 Arranging the Speaker harness
5. Stick a new
INSU KB FPC
to the Cover Assembly.
6. Connect the
Accupoint FFC
and
Dual button FPC
to the connector on
the Click Pad.
Summary of Contents for PORTEGE X40-G
Page 7: ......
