After installing the memory module, make sure that the memory module is secured
with the left and right latches.
Figure 4-8 Seating the memory module
4.14 Smart Card slot
4.14.1 Removing the Smart Card slot
To remove the Smart Card slot unit, follow the steps below and refer to
Figure 4-9
to
Figure 4-10
.
1. Disconnect the
Smart Card slot FFC
from the connector
CN2170
on
the system board.
2. Remove the following screw, and then slide and lift the Smart Card slot
unit shown in the following figure to remove the Smart Card slot.
Summary of Contents for PORTEGE X40-G
Page 7: ......
