Quasar CM-3211/CM-4221 Series User and Installation Guide
56
Triggered Action
The Administrator can specify various alarm actions to be taken when an alarm is triggered. The
options are listed below.
Enable alarm output
– Select this box to enable alarm relay output.
Record stream to sd card
– Select this box in order to save the alarm-triggered recording to
your microSD/SDHC card. Enter the number of seconds for the pre-trigger buffer. Select the
first radial button if you wish to upload for a specified length of time and enter the number
of seconds. Alternatively, select the second radial button to upload during the active trigger.
See Figure 55: Application – Record Stream to SD Card.
Figure 55: Application – Record Stream to SD Card
Note:
Make sure that local recording (with a microSD/SDHC card) is activated so that this
function can be implemented. See
Recording
for further details.
Send Message by FTP/E-Mail
– Select whether to send an alarm message by FTP and/or
e-mail when an alarm is triggered.
