Configuration and Operation
43
Enable IP Filter
1.
Check the box to enable the IP Filter function. Once enabled, the listed IP addresses (IPv4)
are allowed/denied access to the camera.
2.
Select
Allow
or
Deny
from the drop-down menu.
3.
Click
Apply
to determine the IP Filter behavior.
Add/Delete IP Address
1.
Enter the IP address in the
Filtered IP Addresses
text box.
2.
Click
Add
to add a new filtered address. The
Filtered IP Addresses
box shows the currently
configured IP addresses. Up to 256 IP address entries may be specified.
3.
To remove an IP address from the list, select the IP address and then click
Delete
.
