Durr Dental VistaScan Mini View Installation And Operating Instructions Manual Download Page 3

Page: 3 / 64

2142100002L02 1908V007

5.6 Storage box . . . . . . . . . . . . . . . . . 20
5.7 Bite protector (optional) . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . 22

6.1  Installation/setup room . . . . . . . . . 22
6.2  System requirements  . . . . . . . . . . 22
6.3  Monitor . . . . . . . . . . . . . . . . . . . . . 22

7 Installation

. . . . . . . . . . . . . . . . . . . . . . 22

7.1  Carrying the unit . . . . . . . . . . . . . . 22
7.2  Setting up the unit . . . . . . . . . . . . . 22
7.3  Removing the protective film from

the touch screen . . . . . . . . . . . . . . 23

7.4  Attaching the stylus . . . . . . . . . . . . 23
7.5  Checking the memory card . . . . . . 23
7.6  Electrical connections . . . . . . . . . . 23
7.7  Connecting the device to the net-

work . . . . . . . . . . . . . . . . . . . . . . . 24

8 Commissioning

. . . . . . . . . . . . . . . . . . . 25

8.1  Installing and configuring the unit  . 25
8.2  X-ray unit settings . . . . . . . . . . . . . 28
8.3  Acceptance tests  . . . . . . . . . . . . . 29

Usage

9 Operating the touch screen

. . . . . . . . . 30

9.1  Navigating. . . . . . . . . . . . . . . . . . . 30
9.2  Using menus . . . . . . . . . . . . . . . . . 30
9.3  Entering text in the field . . . . . . . . . 30
9.4  Calling up messages on the

touch screen . . . . . . . . . . . . . . . . . 31

10 Correct use of image plates

. . . . . . . . . 32

11 Operation

. . . . . . . . . . . . . . . . . . . . . . . 33

11.1 X-ray . . . . . . . . . . . . . . . . . . . . . . . 33
11.2 Scanning the image data via a

computer . . . . . . . . . . . . . . . . . . . 35

11.3 Scanning image data via the

touch screen on the unit . . . . . . . . 36

11.4 Erasing the image plate . . . . . . . . . 38
11.5 Switch off the unit. . . . . . . . . . . . . 39

12 Cleaning and disinfection

. . . . . . . . . . . 40

12.1 Image plate scanner . . . . . . . . . . . 40

Contents

Important information

1 About this document

. . . . . . . . . . . . . . . 3

1.1 Warnings and symbols . . . . . . . . . . 3
1.2 Copyright information . . . . . . . . . . . 4

2 Safety

. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1  Intended purpose . . . . . . . . . . . . . . 4
2.2  Intended use . . . . . . . . . . . . . . . . . . 4
2.3  Improper use  . . . . . . . . . . . . . . . . . 5
2.4  General safety information . . . . . . . . 5
2.5  Specialist personnel  . . . . . . . . . . . . 5
2.6  Electrical safety . . . . . . . . . . . . . . . . 5
2.7  Essential performance character-

istics . . . . . . . . . . . . . . . . . . . . . . . . 6

2.8 Notification requirement of seri-

ous incidents . . . . . . . . . . . . . . . . . 6

2.9  Only use original parts . . . . . . . . . . . 6
2.10  Transport  . . . . . . . . . . . . . . . . . . . . 6
2.11  Disposal . . . . . . . . . . . . . . . . . . . . . 6
2.12  Protection from threats from the

Internet . . . . . . . . . . . . . . . . . . . . . . 7

Product description

3 Overview

. . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1  Scope of delivery  . . . . . . . . . . . . . 10
3.2  Accessories  . . . . . . . . . . . . . . . . . 10
3.3  Optional items . . . . . . . . . . . . . . . . 10
3.4  Consumables . . . . . . . . . . . . . . . . 10
3.5  Wear parts and replacement

parts . . . . . . . . . . . . . . . . . . . . . . . 11

4 Technical data

. . . . . . . . . . . . . . . . . . . 12

4.1  Image plate scanner . . . . . . . . . . . 12
4.2  Image plate . . . . . . . . . . . . . . . . . . 15
4.3  Light protection cover . . . . . . . . . . 16
4.4  Type plate . . . . . . . . . . . . . . . . . . . 17
4.5  Evaluation of conformity  . . . . . . . . 17

5 Operation

. . . . . . . . . . . . . . . . . . . . . . . 17

5.1  Image plate scanner . . . . . . . . . . . 17
5.2  Image plate . . . . . . . . . . . . . . . . . . 19
5.3  Light protection cover . . . . . . . . . . 20
5.4  Stylus . . . . . . . . . . . . . . . . . . . . . . 20
5.5  Protection cover . . . . . . . . . . . . . . 20

Summary of Contents for VistaScan Mini View

































































Search results

Summary of Contents for VistaScan Mini View

Reviews:

Brands by name

Popular brands

Durr Dental VistaScan Mini View, Installation And Operating Instructions Manual

Search results

Summary of Contents for VistaScan Mini View

Reviews:

Brands by name

Popular brands