2142100002L02 1908V007
39
Usage
i
Pull the protective cover over the device so
that it is completely covered. Make sure that
the markings are at the front.
i
Store the protective cover in a safe place
when it is not in use.
– Due to an error, the image data on the image
plate has not been erased (software error
message).
Erasing the image plate via a computer
i
Select the special
ERASE
mode in the soft-
ware.
i
Scan the image plate (see "11.2 Scanning the
image data via a computer").
Erasing the image plate via the touch screen
i
On the touch screen tap on
Rapid scan
.
i
Select the scanning mode
ERASE
.
i
Scan the image plate (see "11.3 Scanning im-
age data via the touch screen on the unit").
11.5 Switch off the unit.
i
Press the on/off switch
for 3 seconds.
As soon as the unit has shut down it switch-
es off completely. The touch screen is off.
After you switch off the unit, wait 10 s
before switching the unit on again.
Use of a protective cover
The protective cover protects the device against
dirt and dust during extended periods in which it
is not used.
WARNING
Danger of suffocation
i
Store the protective cover out of the
reach of children.
EN
