DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 14 / 104

Clamp rail
12 Service Instructions 2112-5 - 00.0 - 02/2020
3.2 Changing the toothed belt
Fig. 2: Changing the toothed belt (1)
To change the toothed belt:
1. Switch off the machine.
2. Slide the clamp to the left until it reaches the stop position.
3. Loosen the screws (3).
4. Disassemble the cover (2).
5. Loosen the screws (8).
6. Disassemble the cover (9).
7. To release the tension of the toothed belt (7), loosen the screws (4).
8. Loosen the nuts (6).
9. Tighten the screws (5).
(1) - Drive roller
(2) - Cover
(3) - Screws
(4) - Screws
(5) - Screws
(6) - Nuts
(7) - Toothed belt
(8) - Screws
(9) - Cover
(10) - Slide roller
①
② ③④ ⑤ ④ ⑥⑤ ⑦⑧ ⑨ ⑩