DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 59 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 57
8.5.11 Selecting machine control inputs / outputs
This menu is used for troubleshooting and for a manual testing of machine
cycle settings.
The outputs (OUT) can be selected and tested separately.
The corresponding inputs (INP) are displayed for an active output.
Additionally, the selected output can be switched intermittently.
Activated inputs/outputs are marked with highlighted numbers:
Fig. 32: Selecting machine control inputs / outputs
Important
If an output is activated, the machine performs the corresponding function.
Before activating the outputs, remove all unnecessary objects within
the operating range of the machine.
To activate an output:
1. Press the key.
2. Press the key.
3. Press key or .
4. Press key or .
5. Press the key.
 The function number is highlighted in black.
The output is active.
To deactivate the output:
1. Press the key.
To switch the output to intermittent operation:
1. Mark the function number.
2. Hold down the key for approx. 3 seconds.
 The function number is highlighted in black and flashes.
The output is active intermittently.