DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 57 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 55
8.5.7 Actuating the thread clamp manually
After the needle thread has been passed through the needle, the thread
clamp is actuated manually to protect the needle thread from being pulled
out of the needle when the machine cycle starts.
To actuate the thread clamp manually:
1. Press the key.
8.5.8 Checking the cutters manually
The sharpness and function of the cutters can be checked individually.
To call up the
Cutter test
menu:
1. Press the key.
 The display shows the submenu:
Fig. 31: Checking the cutters manually
To check the cutter for the left trouser component :
1. Press the key.
 The cutter performs a cutting movement.
To check the cutter for the right trouser component :
1. Press the key.
 The cutter performs a cutting movement.
To check the cutter for the left fly piece/right side pocket :
1. Press the key.
 The cutter performs a cutting movement.
To check the cutters for the right fly piece/left side pocket :
1. Press the key.
 The cutter performs a cutting movement.
To wind the bobbin thread:
1. Press the key.
2. Confirm the status message.