DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 63 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 61
13 Impulse folder down
Pulse duration folder down, time until folder is
switched airless during pick-up
0.05 s
14 Cl. open till folder up
After folding clamp opens, time until folder up
0.2 s
17 Till tension open
After seam end, time until tension lift on
0.0 s
18 Duration of tens. open
Duty cycle of tension opening
0.4 s
19 Till thread clamp forward
After clamp up, time until thread clamp forward
0.2 s
20 Dur. thread clamp forward
Duration of blowing and thread clamp forward
0.5 s
21 Till stacker transport
After sewing motor stops and transport stamp down,
time until stacker transport moves backward to ES8
0.0 s
22 Dur. sliding table open
Duration for sliding table open
0.0 s
23 Lift. Table mod 00/01-99
Lower lifting table
• Input 00: Lower lifting table via photocell
• Input 01-99: Lifting table is lowered after
corresponding number of pieces
0.0
24 Dur. lifting table sinks 0.0 s
25 Till fabric clamp forward
After pedal is released, time until pocket bag clamp
closes
0.0 s
26 Till scissors closed
Time until cutter pinches the trouser component
0.0 s
27 Duration scissor cuts
Cutting duration of the cutter
0.0 s
28 Till fabric clamp opens
Time during which the fabric clamp is closed
0.0 s
29 Till swing retainer down
Lower swing retainer after seem has been sewn
0.0 s
30 Till retainer swings
Swing retainer after retainer has been lowered
0.0 s
31 Dur. of pulling retainer
Time during which the retainer pulls
0.0 s
33 Clamp moves to stacker
Time until moving begins
0.0 s
34 Stacker stamp open
Distance over which the stamps will feed the sewing
material
0.0 cm
No. Parameter Value Unit