DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 72 / 104

Programming
70 Service Instructions 2112-5 - 00.0 - 02/2020
Switching the sliding table on or off
If this function is disabled, the pocket facing will not be stacked at the seam
end.
To switch the sliding table on or off:
1. Press the key.
8.7.4 Functions on level 4
Fig. 35: Functions on level 4
To call up the special parameters level 4:
1. Press the key on the start level.
 The Service menu opens.
2. Press the key in the Service menu.
 The special parameters level 2 opens.
3. Press the key on special parameters level 2.
 The special parameters level 3 opens.
4. Press the key on special parameters level 3.

The special parameters level 4 opens.
Function key Menu
F1 Back to level 3
F2 Switch vacuum on or off
F3 Switch automatic label feed system or on off
F4 Switch cutter
left trouser component
on or off
F5 Switch cutter
right trouser component
on or off
F6 Switch cutter
left fly piece
on or off
F7 Sew to fixed seam end position
F8 Call up level 5
Switch to level 5