DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 64 / 104

Programming
62 Service Instructions 2112-5 - 00.0 - 02/2020
8.7 Special parameters
Special parameters are values that refer to only one specific seam program.
Changes of these values affect only the current seam program.
Special parameters can be functions that may be enabled or disabled or
parameter values that are set in lists.
For a list of the factory-set special parameters, refer to the
Appendix ( 
p. 95
).
Special parameters that can be programmed in lists
35 Thread lever in top position 200 INC
36 Switch-on position for thread cutting 100 INC
37 Cutting speed 180 rpm
38 Duration of trimming
Duty cycle for thread cutting
0.35 s
39 Turn Back
Thread lever reversing angle
00 INC
40 Process in steps 00
No. Parameter
01 Clamp position right
Clamp position right during piece transfer
02 Folder swing release
Swing folder.
Input of distance in mm after which folder swings right after beginning
of insertion.
Default: 120 mm
03 Insertion speed
Clamp insertion speed
04 Clamp speed
Clamp transport speed
05 Waiting position
Waiting position of clamp behind seam end
06 Sewing speed 1
Sewing speed at seam beginning
07 Sewing speed 2
Sewing speed in main seam
08 Sewing speed 3
Sewing speed at seam end
No. Parameter Value Unit