DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 34 / 104

Setting up the machine
32 Service Instructions 2112-5 - 00.0 - 02/2020
7.7 Adjusting the thread trimmer
Fig. 20: Adjusting the thread trimmer
To adjust the thread trimmer:
1. Turn the handwheel until the needle is at the top dead center
(position C ).
2. Lock the machine in place at position C .
To do so, insert the locking peg into the hole to the left of the handwheel.
3. Install the drive belt (1) so that the feather key (2) is flush with the
marking (3) on the motor housing.
4. Remove the lock.
5. Call up the
Global Parameters
menu:
• Press the key
• Press the
GP
key
6. Enter the following values:
• 35: Thread lever in position up 200 INC
• 36: Switch-on pos. for thread cutting 110 INC
7. To store the value and exit the setting level, press the key.
(1) - Drive belt
(2) - Feather key
(3) - Marking
①
②
③