DURKOPP ADLER 550-12-33, Operating Instructions Manual

Page: 181 / 200

Troubleshooting
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 179
6351
–
6354
Error Control defective
(I²C) • Replace control
6360 Warning Data on machine ID
not permissible • Replace control
6361 Warning Machine ID not
connected • Check the connection of
the machine ID cable
• Replace the machine ID
• Replace control
6362
–
6367
Error Internal EEprom • Replace control
6400
–
6999
Error Internal error • Switch off and on the
machine
• Perform a software update
• Contact Customer Service
7551
–
7659
Error • Internal error
• Cable disturbance
• Cables to the
control panel
Interface defective
• Switch off and on the
machine
• Eliminate source of
disturbance
• Perform a software update
• Replace cable
• Contact customer service
9310 Error • CAN connector not
connected or faulty
• Tape unwinder
faulty
• Replace CAN connector
• Replace tape unwinder
• Replace control
9320 Error • Tape unwinder dirty
• Tape unwinder
faulty
• Clean tape unwinder
• Open throttle valve
• Replace tape unwinder
9910 Error Tilt sensor:
• Machine head is
tilted over
• Tilt sensor not
assembled or
defective
• Erecting the machine
head
• Fit or replace tilt sensor
Code Type Possible causes Remedial action