DURKOPP ADLER 550-12-33, Operating Instructions Manual

Page: 75 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 73
Sewing with ruffling
1. Release the pedal (position 0 ).
2. To select the ruffling type if necessary, press the button.
• : Ruffling top and bottom
• : Ruffling top
• : Ruffling bottom

The set ruffling value is shown on the display.
3. If necessary, use the numeric buttons 0 – 16 to change the
ruffling value.

The set ruffling value is shown on the display below the
ruffling type.
4. Press the pedal forward to position 1 and continue sewing.

The seam will be sewn using the altered parameter value.
Adjusting parameters during sewing
To adjust parameters during sewing:
1. Release the pedal (position 0 ).
2. Change the desired parameter on the control panel ((

p. 68 )).
3. Press the pedal forward to position 1 and sew.

The seam will be sewn using the altered parameter value.
Finishing sewing
To finish a seam:
1. To finish the seam, press the pedal completely backwards to
position
-2 .

The machine stops.
Needle and sewing feet are lifted and remain up as long as
the pedal is kept in the
-2 position.
2. Cut the reinforcement tape at the thread-pulling knife (

p. 59 ).
3. Remove the sewing material.