DURKOPP ADLER 550-12-33, Operating Instructions Manual

Page: 90 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 88
Adding new seam sections
20. To switch to the 2nd seam section, press the
▲
button.

The 2nd seam section is created automatically.
21. Repeat steps 3-11 for all other seam sections.
Finishing and saving the new seam program
There are 2 ways to finish and save the new seam program:
22. When all seam sections have been sewn and adjusted,
press the pedal fully back to position -2 .

The settings for the seam sections of the new seam
program are stored.
P flashes.
23. Adjust the parameters for the seam program (

p. 99 ).
24. Press the ESC button.

The settings of the new seam program are stored.
The machine switches to automatic mode, and the newly
created seam program is selected and can be sewn right
away.
OR
25. As soon as all seam sections have been sewn and adjusted,
press the S button.

The display switches to:
Fig. 56: Teaching a new seam program (programming mode)(4)
26. Press the pedal fully back to position -2 .

The new seam program is stored.