DURKOPP ADLER 550-12-33, Operating Instructions Manual

Page: 85 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 83
5.5 Teaching a new seam program
(programming mode)
You can create new seam programs using the (

p. 91 ) control
panel OR by teaching.
Teaching means to sew the desired seam sections and
manually adjust the seam section parameters in the process.
The parameters for the seam program can subsequently be
adapted.
Information
Every new seam program is based on the preset values that have
been assigned at the factory and can only be changed in service
mode (

Service Instructions ).
To teach a new seam program:
Assigning a new seam program number
1. To open the softkey menu in automatic/edit/manual mode,
press the lower softkey .

The softkey menu appears.
2. To create a new seam program, press the button.

The display switches to:
Fig. 53: Teaching a new seam program (programming mode)(1)

The display shows the next available seam program number.
3. Seam program number
• Confirm with OK or
• Change using
▲
/
▼
or
• Re-enter using the numeric buttons 0-9