DURKOPP ADLER 550-12-33, Operating Instructions Manual

Page: 119 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 117
5.9.5 Setting seam program cancellation using
the pedal
The machine has been set up at the factory in such a way that
a seam program can be canceled during sewing by pressing the
pedal in automatic mode. To this end, press the pedal to position
-
2 twice (

p. 82 ).
This function can be switched off. In this case, a seam program
can no longer be canceled with a press of the pedal. Only when
a seam program has been sewn completely can a new seam
program be started or automatic mode be exited.
To set seam program cancellation with a press of the pedal:
1. Open the
User configuration
menu (

p. 114 ).
2. Use
▲
/
▼
to select the
Pedal Abort
parameter.
3. Confirm with OK .

The submenu opens.
4. Confirm with OK .
5. Change the desired value using the
▲
/
▼
buttons.
• 0 = Seam program cancellation via the pedal is
switched off
• 1 = Seam program cancellation via the pedal is
switched on
6. To exit service mode, press the ESC button.

The changed value is stored immediately.