DURKOPP ADLER 512-211-01, Service Instructions Manual

Page: 58 / 82

Service settings via software
56 Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
12 Service settings via software
This chapter describes service settings such as
• The basic configuration of the machine
• Test functions for individual elements of the machine
• Calibration functions
• Presets for programs and functions
Information regarding changes to the stitch length, thread tension, curve
support, etc. as well as instructions for accessing and creating sewing
programs can be found in the operating manual (

Operating manual,
Section 5 Settings via software ).
12.1 Basic software operation
The software is controlled via the control panel.
Fig. 31: Control panel
Control panel buttons:
Button / LED Pos. Function
(1) USB button with LED
Saves/loads a sewing pattern to/from a USB stick.
(2) Needle thread clamp button with LED
Fixes needle thread during the first stitch.
LED on = needle thread clamp on
LED off = needle thread clamp off
①
②
③
④
⑤
⑦ ⑧ ⑨ ⑥
⑪
⑫
⑩