DURKOPP ADLER 512-211-01, Service Instructions Manual

Page: 61 / 82

Service settings via software
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 59
3. Press the Ready button to confirm the parameter.

The LED in the button illuminates. The Program display shows
"°°20".
4. Press button P1 .

The thread trimmer sensor disk travels to position.
Fig. 32: Setting the blade position
5. Check to see if the hole of the thread puller blade and the needle guide
of the throat plate are aligned:
Fig. 33: Checking the hole of the thread puller blade
• Case A : The setting is wrong; the thread puller blade overlaps the
counter blade:
Adjust blade sensor upwards.
• Case B : The setting is wrong; the thread puller blade overlaps the
needle guide:
Adjust blade sensor downwards.
• Case C : The setting is correct.
6. Press button P1 .

The thread trimmer sensor disk travels to position again.
A
B
C