16
Official installation of the upper side of the adapter on the flexible liner
2.1.Add a bead of Viton® caulking (resistance to condensate) all around
inside the adapter on the beginning of the flare. Add another bead
of Viton® caulking all around the outside of the flexible liner at 3/4”
from the edge
(Figure 18)
.
Figure 18 -DuraSeal Flex Vi ton• caulking
2.2.Push the adapter on the liner all the way in, until you can’t seethe
mark made on the flexible liner earlier
(Figure 19)
. Make sure that
the Viton® caulking is sealed well at the joint inside the adaptor
by verifying inside the adaptor.
Figure 19-DuraSeal Flex assembly
2.3.Add a bead of the S-650 red caulking all around the outer junction
of the adapter and the flexible liner to make sure everything is well
sealed. Also add over the screw holes
(Figure 20)
.
Figure 20- DuraSeal Flex S-650 caulking
Screw Holes
