56
Chapter 3 Advanced Operation
Copyright © 2019 Duplo Corporation All Rights Reserved
4-3. Cross fold paper at desired folding position
Cross folding is a method to cross fold standard paper and non-standard paper at the desired folding
position. Standard paper is handled the same as non-standard paper and is operated in a method that saves
the folding position on the custom fold.
1
Save the custom fold using the procedure in “3. Custom Folding” (p.47).
2
Single-fold the paper in the custom folding mode.
3
Again, save the custom fold of the single folded paper using the procedure in “3.
4
Take procedures for “4-1-1. Stacking paper” step 2 to “4-1-3. Operation procedures” of
“4-1. Cross fold of standard paper” (p.51).
5. Using Special Paper
Do not put fingers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
5-1. Art paper, coated paper
Art paper and coated paper often stick to each other due to the printing ink and become difficult to separate,
resulting in double-feed. When using these types of paper, follow the procedure below.
1
Separate the paper well.
Chapter 1”8-1. Paper used” (p.30)
Some of recycled art or coated paper may be unsuitable for folding due to weak stiffness.
2
Align the paper.
3
4
4
25 mm
0.98 inch
3
Stack the paper on the paper feed tray.
4
Attach the paper feed guide.
Do not stack too many sheets of paper on
the paper feed tray. If too many sheets are
stacked, the paper will stick on each other
from its height and become difficult to
separate, resulting in double-feed.
The amount of stacked sheets should be
about half the weight of the paper feed
guide (approx. 25 mm/0.98 inch).
