Dunkirk DKVLT-050 Installation, Operation & Maintenance Manual Download Page 73

Page: 73 / 84

1.5 Theory of Operation

User Interface Display

Explanation

STANDBY

Boiler operates in standby mode until demand for Central Heat

(CH) or Domestic Hot Water (DHW) is detected.

User Menu

User Menu structure includes:

• ‘Boiler Status’ submenu– User can monitor general boiler

status parameters such as sensor temperatures and

pump operation.

• ‘Settings’ submenu – User can view CH , adjust DHW

supply water set points and also select control language.

• ‘Cascade Status’ submenu – Boiler set to function as

part of multiple boiler installation; submenu used to view

runtime parameters. See Multiple Boiler Manual.

Boiler Status

Supply Temperature set point displayed.

If boiler running in CH mode, CH set point displayed.

Note:

• While running in Outdoor Reset mode, this value may

change in proportion with the outdoor temperature.

• If the boiler is running in DHW mode, the DHW supply set

point is displayed.

Several boiler runtime parameters can be viewed while in ‘Boiler

Status’ submenu.

Operational status of pump system also shown.

Information available during all states of boiler operation.

Sensor values with troubleshooting tree used to diagnose

typical problems.

APPENDIX A - CONTROL MODULE

Summary of Contents for DKVLT-050





















































































Search results

Summary of Contents for DKVLT-050

Reviews:

Related manuals for DKVLT-050

Brands by name

Popular brands

Dunkirk DKVLT-050, Installation, Operation & Maintenance Manual

Search results

Summary of Contents for DKVLT-050

Reviews:

Related manuals for DKVLT-050

Brands by name

Popular brands