Version
08.2017
|
Page/
Seite
4
www.dunkermotoren.com
WARNINGS
Warning symbols and meanings
In this User Manual warning symbols are used. These are intended to alert you to the potential hazards to personnel
which are associated with the equipment described, in all aspects of use, including handling, installation, operation
and maintenance.
Heart pacemakers.
Personnel fitted with pacemakers must not handle or work on this equipment.
Strong magnets.
The thrust rod contains powerful magnets and will strongly attract ferrous objects.
Damage can occur to computer disks and credit cards.
Electric shock.
Potentially lethal voltages may be present during the commissioning and servicing of
this equipment. Isolate and disconnect all sources of electrical supply before working on the equipment.
Particular care needs to be taken when working on or around forcer phase connections.
Crush hazard.
The forcer may move unexpectedly. Always isolate all sources of electrical supply before
working on the equipment.
Heavy object.
May need two people to lift.
General hazard.
Follow the advice given.
Electrical safety
This equipment must be earthed.
EMC precautions
This equipment is intended for use in a light industrial environment. It is recommended that the following precautions
be observed during installation:
• Keep all cable lengths to a minimum.
• Provide as much physical separation as possible between power and sensor cables. In particular, avoid long,
parallel runs of cables.
• Maintain screen continuity throughout the cable run.
• Use 360 degree screen terminations where possible. “Pig-tail” terminations are not recommended.
• Ensure compliance with any local electrical and EMC regulations in force at the time of installation. This is the
responsibility of the User.
