Version 08.2017 | Page/ Seite 18
www.dunkermotoren.com
Preparation of replacement forcer
Refer to Figure 3.10. Transfer the following items from the removed forcer to the replacement forcer:
• The bearing carriage. Align the bearing carriage to be 0.5 mm below and parallel to the edge of the forcer.
•
The encoder readhead bracket fitted with the encoder readhead (optional items).
•
The limit switch flag (optional).
• The drag chain upper mounting bracket.
Drag chain upper mounting bracket
Encoder readhead
Bearing carriage
Limit switch flag
Datum edge
Power/sensor connector
Forcer
Encoder readhead bracket
Figure 3.10
Forcer
Move the forcer off the
end of the bearing rail
Figure 3.9
