Dukane SCR+, Operation Manual

Page: 24 / 98

The ATEL also features:
•
The ability to dial three-, four-, or five-digit alphanumeric extensions and room numbers
•
Intercom features:
Queuing of call-ins
Queue scroll and select
Privacy indication
• Telephone features:
System extension, PBX/KSU, and outside line dial
Call hold
Call transfer
Call forward
Music-on-hold
Three-party conference
•
System features:
Paging
Tone distribution
Audio program distribution and monitoring
Background music
System time and date set
Note:
Many System telephone features are governed by the System programming.
Contact your Dukane distributor if a feature is not enabled.
Display Window
When the ATEL is not in use and no calls are present, the display shows the date and
time in either 12- or 24-hour mode. When a call-in is received from a room speaker, the
calling station number and the position of the call within the call-in queue appear on the
display. When an emergency priority call-in is received, the display flashes and a distinc-
tive tone sounds. When a call from an STEL or CTEL is received, “Call from X” appears.
(X is the number of the calling extension.) When the ATEL is used to call another System ex-
tension, the dialed extension number appears on the display. When the ATEL is used to
make a page or distribute tones, the display shows the active mode (page or tone).
When the ATEL dials 9 or 8X to dial an outside telephone, it displays “CO” followed by
each digit dialed. Once dialing is completed, the display is updated to read “COXX Tele-
phone Number” where XX is the actual outside line being used and Telephone Number is
the number which was dialed.
When line pickup (79XX) is used to select a specific line, such as line one, for dialing
out, the display would read “CO01” after which each digit dialed would be displayed.
Once dialing is completed, the display is updated to read “CO01 Telephone Number.”
10 SCR+ Telephone Operation Manual
ATEL Description and Features