Dukane SCR+, Operation Manual

Page: 68 / 98

Paging Selected Rooms
To make a page to selected rooms, follow the steps below. Regardless of whether or not
your System is networked to other Systems, you can only page selected rooms in your own
System.
1. ATEL: Lift the handset or press SPKR PHONE.
STEL, DTMF telephone, and CTEL: Lift the handset.
2. ATEL: Press PAGE then press 3, or dial 723.
STEL, DTMF telephone, and CTEL: Dial 723.
3. ATEL: Enter the room numbers to be paged and press #.
STEL, DTMF telephone, and CTEL: Same as ATEL.
Note:
A double tone burst after pressing # indicates restricted access to this feature from
this phone. You must enter a four-digit password after the tone to complete this
operation. See
Password Control on page 3.
4. ATEL: Speak clearly into the handset or microphone to make a page announcement.
STEL, DTMF telephone, and CTEL: Speak clearly into the handset to make a page
announcement.
5. ATEL ONLY: If muting is also desired while using the microphone, press TALK to
change from hands-free to push-to-talk paging. Thereafter, pushing TALK allows
page audio through, while releasing TALK mutes the microphone. The MUTE
button can also be used to toggle between mute and unmute.
6. ATEL: Hang up the handset or press SPKR PHONE to end the page.
STEL, DTMF telephone, and CTEL: Hang up the handset to end the page.
Paging All But Excluded Rooms
To make a page to all rooms excluding those selected, follow the steps below. Regardless
of whether or not your System is networked to other Systems, you can only page rooms
in your own System.
1. ATEL: Lift the handset or press SPKR PHONE.
STEL, DTMF telephone, and CTEL: Lift the handset.
2. ATEL: Press PAGE then press 4, or dial 724.
STEL, DTMF telephone, and CTEL: Dial 724.
54 SCR+ Telephone Operation Manual
Paging