SPA Actuator with Intelli-Motion™ Technology Manual R00
May 2022
Page 14 of 48
2.2.4 Ethernet Model
Use an industrial Ethernet cable with female, 4-pole D-Coded M12 connector on the actuator end, MDE45-4FP-RJ45
series or equivalent. The connector on the other end will be determined by the requirements of the customer’s equipment
(PLC, Ethernet switch, etc.).
Connect the cable from the customer controller to the 1/4" NPT Ethernet connector on the actuator.
Figure 2-4: Ethernet Wiring Diagram
Figure 2-5: Ethernet Connector
Ethernet Wiring Diagram
TX+
RX+
TX-
RX-
*Auto-MDIX capable
PIN 1
PIN 2
PIN 3
PIN 4
