Ducasa Colorado DGi+ 450, Manual, Page: 10 / 20

10
22
.5°C
1h 35m
BOOST
set temp
+
TIME
1h
BOOST
Set time:
OK
21
.5°C
Wed. 11:00
Set point:
COMFORT
Next Program ON Time
Starts at:Tue. 20:00
Set point:
21
.5°C
Wed. 11:00
Brightness Level
1 2 3 4
ON
Level
OFF
1 2 3
OFF
Level
DISPLAY SETTINGS
Backlight Time
5 10 30 always
DISPLAY SETTINGS
Eco Display
OFF
ON
DISPLAY SETTINGS
Beep
OFF
ON
DISPLAY SETTINGS
CONFIG
COMFORT
ECO
ANTI-FROST
PROGRAM
SETTINGS
COMFORT
TIME
Settings
DISPLAY
Settings
ADVANCED
Settings
SETTINGS
Brightness Level
Backlight Time
Eco Display
Beep
DISPLAY SETTINGS
The first press of any button will wake up the towel rail any further
button presses will activate the function required.
To make sure your program is running Press
the Mode/OK button until is shown at the
bottom of the screen.
The screen will change between the operation
screen and the next time of operation.
At any time, the temperature can be changed
with the +/- buttons.
BOOST
The towel rail has a Boost mode that allows the
user to temporarily override
the current operating mode.
The Boost button will
immediately turn on the towel
rail for 1 hour at 2ºC warmer
than room temperature.
To adjust the BOOST temperature, use the +/-
buttons.
To adjust the duration, press
the CONFIG button, the
BOOST time setting screen
will be displayed; set the
required time between 1
hour and 24 hours using the
+/- buttons. To return to the
BOOST screen press the CONFIG button.
You can quickly adjust the duration with the
BOOST button . Each press will increase the
duration of BOOST mode by 1h.
To return to the previous mode and cancel the
Boost mode, press the
Mode/OK
button.
DISPLAY SETTINGS
The DISPLAY menu on the towel rail allows the
user to customise how the towel rail looks whilst
the screen is on and off, it also allows the button
sound to be controlled.
To open the DISPLAY menu, press and
hold CONFIG until the menu appears, select
SETTINGS using +/- button and press Mode/OK ,
finally select DISPLAY using +/- button and press
Mode/OK .
To adjust the brightness of
the screen, select Brightness
level and press Mode/OK .
The ON levels are between
1=25%, 2=50%, 3=75% &
4=100%.
The OFF levels are Off,
1=3%, 2=10% and 3=20%.
Chose the level required
and press Mode/OK .
To set the time the screen
stays on for after the
last button press, select
Backlight Time using +/-
button from the DISPLAY
menu and chose how many
seconds are required.
Confirm with Mode/OK . The
factory default is 10s.
The towel rail features a
“responsible consumption”
Eco Display mode, this
mode will show a coloured
bar across the bottom of
the screen to encourage the
user to set an economical
temperature.
This feature is turned on
and off in the ECO DISPLAY
menu.
To de-activate the beep
when each key is pressed
enter the BEEP menu and
select either On or Off, using
the +/- button and then press
Mode/OK to confirm