S e c t i o n 2 – U s i n g a n E x t e n s i o n
5
Access Code Dialled
Service Feature Description
* 21 ext. #
Set All Call Diversion From Own Extension
* 2 N ext. #
Set Divert No Answer After delay N = 2 – 9 for 5, 10, … 45 sec.
# 21 ext. #
Cancel All Call Diversion from another extension
# 21 #
Cancel All Call Diversion from own extension
# 20 #
Cancel all diversions
*31 ext. #
Set Diversion On Busy
#30 #
Cancel Diversion On Busy
#30 ext. #'
Cancel Diversion On Busy from another extension
*7411#
Toggle Do not disturb
*1
Read message on Executive Terminal (optional)
*6 …
Extension feature programming code
*7 …
Extension feature programming code
*8 …
System feature programming code
*9 …
System feature programming code
Feature Access Codes after Recall (R) or Transfer key
Access Code Dialled
Service Feature Description
R0
(or 9)
Outgoing Exchange Line Call
(* For systems using 9 for a line)
R ext.
Enquiry call to an extension (hang up to transfer)
R19
Open relay contact of connected door phone
R** account_PIN
Code to enter before dialling out if account codes are active
R* ext.
Make a brokerage call to an extension
R*0
(or R*9)
Make a brokerage call to exchange line
(* For systems using 9 for a line)
R*9 exch. line
(or R*0 exch. line)
Make brokerage call to specific exchange line
(* For systems using 9 for a line)
R3 ext.
Initiate conference call with extension
R39
(or R30)
Initiate conference call with free exchange line
(* For systems using 9 for a line)
R30 exch. line
(or R39 exch. line)
Initiate conference call with specific exchange line
(* For systems using 9 for a line)
R500
Redial last number
R501 – 599
Dial system speed numbers
R70 – 79
Dial extension speed numbers
R80
Make a general call to all extensions
R81
Extension group 1 call with 1 ring
R82
Extension group 2 call with 2 rings
R83
Extension group 3 call with 3 rings
R85
Park an exchange line
R86
Pick up any call
R87
Send a flash signal to exchange line
R88
Make outgoing call with data protection
R90
(or R00)
Hold an exchange line call
(* For systems using 9 for a line)
R9 exch. line
(or R0 exch. line)
Pick up call on exchange line 1 – 6
(* For systems using 9 for a line)
