I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
48
Default
No alarms are enabled. All alarm external numbers are empty. All extensions are programmed to ring
on internal alarm. Alarm loops sensors are set to normally closed, no entry delay.
Programming
It is recommended that inexperienced users use the PC program option for security alarm
programming.
Alarm programming codes should follow the seven steps in order below. This is to prevent incorrect
setting of the alarm. The system performs checks on settings after each programming code. E.g. a
code to set an external alarm will be rejected unless a number to dial has first been programmed.
Step 1
: Set the alarm loop type and entry delay
Alarm Loop 1 Setting and Entry Time Delay
System Settings
Alarms
Alarm 1 loop
Alarm Loop 2 Setting and Entry Time Delay
System Settings
Alarms
Alarm 2 loopn
Step 2
: Set the extensions to ring on internal alarm, by default all extensions will ring. A
minimum of two extensions must be in the internal ring group.
Exclude an extension from internal alarm ringing group.
Include an extension to internal alarm ringing group.
Step 3
: Program the external telephone number(s) to ring,
required for external alarm only.
External number 1 for alarms
System Settings
Alarms
Alarm number 1
External number 2 for alarms
System Settings
Alarms
Alarm number 2
Step 4
: Program the alarm confirmation number, required for external alarm with
confirmation only.
Program Confirmation Number
System Settings
Alarms
Confirm number
Step 5
: Program the alarm type and internal / external notification options.
Alarm type Loop 1
System Settings
Alarms
Alarm function 1
Alarm type Loop 2 (Including day/night switch)
System Settings
Alarms
Alarm function 2
Alarm type for both Loops 1 & 2
Step 6
: If a fax/voice card is installed then a message may be
recorded at extension 13 and played back to the external number if the alarm is triggered.
Record alarm 1 triggered message, speak at tone then hang up gently
Record alarm 2 triggered warning message
Record correct alarm confirmation code has been received message
Step 7
: If external notification is required then select the notification
method.
Assign Warning Tone/Voice Msg. to Alarm 1
General Settings
Set alarms
Alarm 1 warning msg.
Assign Warning Tone/Voice Msg. to Alarm 2
General Settings
Set alarms
Alarm 2 warning msg.
Daily Operation Codes
Arm Alarm 1
General Settings
Set alarms
Arm alarm 1
Arm Alarm 2
General Settings
Set alarms
Arm alarm 2
Arm Both Alarms
PIN
loop
Key
loop =
1 for Normally closed, 90
second entry delay
2 for normally closed, 0
second entry delay
3 for Normally open, 90
second entry delay
4 for normally open, 0
second entry delay
number =
external number to dial
confirmnumber =
4 digit confirmation
number to reset alarm
type =
1 for internal alarm
2 external alarm without
confirmation
3 for external alarm with
confirmation
4 for internal/external
alarm without
confirmation
5 for internal/external
alarm with confirmation
6 for day / night switch
on loop 2
7 for social alarm type 1
8 for social alarm type 2
notify_type =
1 for warning tone
2 for alarm voice msg. 1
3 for alarm voice msg. 2
alarm_no =
1 for alarm loop 1
2 for alarm loop 2
* for both alarms
PIN
loop
PIN
ext.
PIN
ext.
PIN
number
PIN
number
PIN
confimnumber
PIN
type
PIN
type
PIN
type
PIN
PIN
PIN
notify_type
notify_type