43 of 3
Precautions
1)
Do not install the equipment in direct sunlight or near a heater because it may enter the
protection state and stop the operation due to deformation, fading and high temperature;
2)
Do not install or store the system equipment in a dusty and humid place, otherwise it may
cause the operating stability and intermittent fault of the system equipment;
3)
The system equipment shall be away as far as possible from the equipment with a strong
magnetic field to prevent the high electromagnetic interference from affecting the normal
operation of the system equipment;
4)
Please ensure a appropriate spacing between the equipment or devices for a good
ventilation and heat dissipation when many PAVA6500Es are mounted in the same cabinet
in the system configuration;
5)
The remote microphone (PAVA6006) provides the 24V phantom power supply. Please
shorten the length of cables when the PAVA6500 indicator light becomes darker or fails to
work normally (it is normal for five types of wires/cables after field test of 600m. it is noted
that this length of 600m refers to the total length of loop rather than the length of single
equipment or device);
6)
The main system equipment lines are all back up, so please conduct the configurations
according to the actual needs. In case of any serious fault, resulting in that the system fails
to operate normally, please feel free to contact the after-sales service personnel of this
company for repair and treatment. Do not attempt to disassemble the built-in parts for
repair and maintenance to prevent the permanent damage of the equipment or modules
and avoid the electric shock accidents;
7)
Please make sure of a good grounding for the equipment in order to ensure the reliable
operation of the equipment.
