12 of 3
○
,5 —— 8 Programmable Input Contact Interfaces
Under the normal status, it will be OK to maintain the normal opening. When a short circuit status is
detected, it will trigger a preset processing event (the preset processing event of the contact refers
to the PAVA6000).
○
,6 —— Ethernet Interface
Mainly used to connect the PAVA6000.
Notes:
1)
The default IP address of the equipment is: 192.168.1.168 and the communication port number is 16888.
2)
If you forget it after the modification through PAVA6000, you can restore the default IP address by pulling off
and then pulling on the sixth bit of “15” (please refer to the related chapters of PAVA6000).
3)
Of course, if you do not want to use this default IP address, please pull on the fifth bit of “15” to open DHCP
function and determine your network router has opened this DHCP function.
4)
Support the computer to directly connect PAVA6000 device and automatically recognize the crossover and
straight-through network. Of course, in order to unify the network cables of five categories of the system, they can all
consult the TIE/EIA-568B standards, including the connection of PAVA6500E with PAVA6006.
○
,7 —— Main/Backup Interfaces of Business Microphone
Used to connect PAVA6006;
Support the closed and star-shape connection (shown below) and the software automatic recognition.
Closed or Loop Connection Star Connection
○
,8 —— Main/Backup Interfaces of Extended Host
used to connect PAVA6500E;
Support the closed and star-shape connection (refer to the above “7”) and the software automatic recognition.
○
,9 —— SD Card
Real-time detection of equipment or devices;
The maximum capacity acquired upon the test is 32G (please format it with FAT file format);
It is prohibited to pull out this card during the operation, because it may lead to the missing of important logs
and important references of the equipment modules;
Note: File memory way in SD card;
