31 of 3
”Network adapter” is used to modify the reference of host network, which shall be kept consistent with the current
network of the user;
“Empty all log” is used to delete all status records or logs of host system modules (please take care in operations,
and please refer to the following chapters LOG);
“Software Security” is used to enhance the operation security, namely, the security authentication as the user
exits. If it is “checked”, it is necessary to enter the password as the user exits the software.
④
“HELP” menu is used mainly to view the software version.
2.4.3. Introduction of “Current Operating Interface Selection”
Overview: “CONTROL” will control the system partition output status together with audio control
button at the right side, including PAVA6500 system grouping configurations, the output control of single
partition (zone) of specified PAVA6500 host or PAVA6500E Extended host.
1. “STATE” is used to check the operating status of system devices and modules;
2. “SYSTEM CONFIGURATION” is used to check or modify the current working parameter configuration
of the system devices or equipment;
3. “LOG” is used to check the logs or records of system devices and modules;
4. “OTHER” is used to modify the user’s password, proofread the time of PAVA6500 host and modify
speaker circuit impedance error value of PAVA6500 system. The greater the percentage is, the lower
the accuracy will be.
2.4.3.1. Partition Control
Login the software or click the “CONTROL” at left side, display as shown in the above
(Fig.1). The user information is provided in the above figure interface:
①
On the central left side, it displays that there are six groups using the PAVA6000 controllable
system;
②
On the central right side, it displays that the current system has six partitions/zones;
③
The red LED on the right top indicates that the current system operates in an emergency mode;
④
The yellow LED indicates that the current system module is in trouble;
⑤
The die-out of LED lights of red and yellow EVAC voice buttons indicates that the EVAC voice
message in SD card is OK, namely, the EVAC voice message in “evac_message” and
“alert_message” folder in the SD card is intact.
Notes:
①
On the left side is the control knob of current output lines of PAVA6500 or PAVA6500E
panel. The PAVA6000 panel only displays the current output of valid line of the host;
②
PAVA6000 controllable system groups can be set up as Groups 0-120. Through the
configuration quantity of “Equipment parameter” in “SYSTEM CONFIGURATION” (6 parameters in
default), the system partitions/zones contained by each group can be set up via the “Group”.
③
If want to display the current status of all zones of the system, please move the mouse
pointer to the blank space in the group listbox, double-click the mouse or click the button
on the right side;
④
If want to check the zones contained in the specified group, please click the corresponding
