*
*
Network Address System
Network Public Address System
Network Public Address System
14
4. DIP indicator
The indicator is on when the user uses DIP switch to modify IP address.
Features:
Smart power management function
Host switch and power management function
Indicating function of alarming, fault and the other emergencies output
Supporting 12V/100mA and shortcut output connecting with the output indicator
The power management module can be installed on the extension card slot of the network PA Host with 2
screws.
2.5.1 Settings of power management module on the host
To set the power management module in network PA host, first install and connect the module, and then modify
the IP address of the module to be in the same network segment as the host (see 5.8.2 Equipment Maintenance).
And then set the parameters as shown in the below figure.
